Waterproof 48V 1200W Fat Tire 26" Direct Drive Conversion Kit: Front-Rear, LED-LCD Display, Thumb-Twist Throttle
Introducing our 2020 model conversion kits. A complete waterproof system from connectors to the motor ensuring reliability and efficiency. We have also introduced new products like the S830 LCD display along with the 26" Fat Tire Conversion Kit
eBikeling Fat Tire Direct Drive Brushless Electric Bicycle Conversion Kits come with a 1200W hub motor and a 30Amp controller.
Kits are ready to install with aluminum double-walled rim and hub motor are already attached. All you need to do is to transfer the original tire.
We have two throttle control options to choose from, twist or thumb.
There are several other accessories included to complete this ebike kit such as a pedal assist sensor, or a set of brake levers with safety cutoff switches.
The wheel axle diameter is 10 mm. Steel forks can be filed If the axle does not fit into the dropout because of its slightly larger diameter. Please do not file more than necessary and make sure that it does not damage the forks. Aluminum forks can also be filed with extra caution.
Aluminum rims have openings for a Schrader-type valve.
Kit doesn't have a regen brake option.
The controller comes with an SY60 male type battery connector (Compatible with XT60 connectors)
PAS/Brake Levers are optional. Kits will operate without them.
You will be able to use your own brakes and freewheel.
Recommended tire width: 4"
Rim Width (Inner): 100mm
Rim Diameter (Outer): 572mm
Rim Diameter (Inner): 535mm
Spoke: 163mm 12G Carbon Steel Copper Nipples
Rear dropout: 175mm
Rear Axle Length: 238.5mm
Front Axle Length 210mm
Front Dropout: 135mm
Motor Wheel Weight 15.8lbs
Motor Torque: 30 Nm Efficiency > 82%
Motor RPM (Nominal): 430
Motor Hub Diameter: 242mm
Motor Magnets: 46
Peak Power: 1.45kW
Operating Mode: S1
Direct Drive Brushless Hub Motor
Brushless Motor Controller (No matching battery connectors or adapters included)
LED or upgraded LCD Display
Twist or Thumb Throttle
Pedal Assist Sensor
Freewheel (for rear kit)
Two Brake Levers with safety switches, V type and Disc brake compatible
Installation hardware and zip ties
Batteries not included
Shipping: Shipping to Hawaii, Alaska, APO, FPO, Puerto Rico will be extra. For shipping charges outside the lower 48 US states contact us first.
Warranty: All items are covered under 3-month warranty.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
OK so far, the wheel is not centered between my forks, I would like to use one of the included washers to get it more centred but if I put one in, the axle is not long enough on the brake side to add the torque arm attachment and the large nut, so I can’t centre the wheel, I will try it as it is, fingers crossed. More detailed instructions about which washers to use (if the axle is long enough) would also be helpful in the instructions.
These guys were OUTSTANDING from the start! Before even purchasing a kit, I contacted their customer service and spoke with them about sizing, installation, choosing the size batteries, etc. They took the time to explain and answer all of my questions. After purchasing their 1200 watt waterproof fat bike kit, the excellent customer service continued with any questions I had and even replaced a malfunctioning controller at no cost! This kit was exactly what I needed for my WWII Harley WLA Tribute Bike. This bike is SUPER HEAVY and needed the power to get it going and this kit didn't disappoint. I will be ordering more kits from them this Spring as I have a couple more builds to finish!